بررسی مقایسه‌ای تأثیر کاربرد سیلر سطحی یا پرایمر خود اچ کننده بر ریزنشت حفرات کلاس V ترمیم شده با Class V Cervical Restorative Resin

نوع مقاله : Original Articles

چکیده

مقدمه: امروزه مواد ترمیمی رزینی به نام Class V cervical restorative resin معرفی شده‌اند که همراه با سیلر سطحی اختصاصی آن (Seal-n-Shine) جهت کاهش ریزنشت در ترمیم حفرات کلاس V به‌کار می‌روند. در این مطالعه تأثیر کاربرد سیلر سطحی یا پرایمر خود اچ کننده بر ریزنشت حفرات کلاس V ترمیم شده با این ماده ترمیمی مورد بررسی قرار گرفت.مواد و روش‌ها: در یک مطالعه تجربی- آزمایشگاهی، با استفاده از فرز کارباید 56، بر روی سطح فاسیال40 پرمولر بدون پوسیدگی، حفرات وج شکل کلاس V به ابعاد 3×3×5/1 میلی‌متر به نحوی تراشیده شد که مارجین اکلوزالی در مینا و مارجین سرویکالی روی سمان قرار گیرد. سپس دندان‌ها به 4 گروه مساوی تقسیم و هر گروه با استفاده از یک دسته از مواد زیر ترمیم شد: ماده رزینی کلاس V به تنهایی؛ ماده رزینی کلاس V به همراه سیلر اختصاصی آن؛ پرایمر خود اچ کننده SE Bond و ماده ترمیمی کلاس V؛ پرایمر خود اچ کننده SE Bond، ماده ترمیمی کلاس V و سیلر سطحی SE Bond. آن‌گاه همه نمونه‌ها در چرخه‌های حرارتی (1500 چرخه، 55-5) و سپس به ترتیب در محلول نیترات نقره 50 درصد و داروی ظهور قرار گرفتند. در نهایت، دندان‌ها به طور طولی برش خورده، جهت تعیین درجه ریزنشت توسط استریومیکروسکوپ با بزرگ‌نمایی 28 بررسی شدند. نتایج حاصل با آزمون‌های آماری کروسکال- والیس و من- ویتنی تحلیل شد.نتایج: در مارجین‌های مینایی، هیچ‌گونه تفاوت معنی‌داری در ریزنشت بین گروه‌ها وجود نداشت. در مارجین‌های عاجی بین گروه یک و سایر گروه‌ها تفاوت معنی‌دار مشاهده شد ([1 و 2]، [1 و 3]، [1 و 4]) اما تفاوت بین سایر گروه‌های دوتایی معنی‌دار نبود.نتیجه‌گیری: جهت کاهش ریزنشت حاصل از کاربرد ماده ترمیمی کلاسV، استفاده از آن به تنهایی مؤثر نیست و بهتر است سیلر اختصاصی آن (Seal-n-Shine) در سطح ترمیم، یا یک عامل اتصال دهنده عاجی خود اچ کننده در زیر ترمیم به‌کار رود.کلید واژه‌ها: ریزنشت، ریباندینگ، سیلر سطحی، پرایمر خود اچ کننده، ترمیم‌های کلاس V.

عنوان مقاله [English]

The Influence of Surface Sealer or Self-etch Primer on Micro Leakage around Class V Cavities Filled with Class V Cervical Restorative Resin

چکیده [English]

Introduction: Today a new restorative resin called “Class V cervical restorative resin” with itsspecific surface sealer “Seal-n-Shine” has been introduced to use for reducing of micro leakage inclass V restorations. The aim of this study was to evaluate the influence of surface sealer or self-etchprimer on micro leakage around class V cavities filled with “Class V cervical restorative resin”.Methods and Materials: In this in vitro experimental study, wedge shaped cavities were prepared onfacial surface of 40 intact premolars, using No. 56 carbide bur. The occlusal margin was prepared inenamel and the cervical margin was in cement. The teeth then were divided into 4 groups of 10. Fourgroups of materials were used, one for each group of the teeth: class V restorative resin; class Vrestorative resin and its specific sealer; self – etch primer of Clearfil SE Bond and Class V restorativeresin; and self – etch primer of Clearfil SE Bond, class V restorative resin and surface sealer ofClearfil SE Bond. Then all the samples were thermo cycled (1500 cycle, 5-55). Afterwards they wereplaced in 50% silver nitrate solution and developing solution, respectively. Finally they were sectionedlongitudinally and were evaluated by stereo-microscope at × 28 magnifications. The data wasanalyzed using Kruskall-Wallis and Man-Whitney tests.Results: There were no significant differences in micro leakage of enamel margins between the fourgroups. But, considering the dentinal margins, the differences were significant between groups 1, 2; 1,3; and 1, 4. The differences between the other two paired groups were insignificant.Conclusion: For decrease of micro leakage, the usage of class V cervical restorative resin per se is noteffective, and it is better to apply its specific sealer (Seal-n-Shine) on the surface of restoration, or aself-etch dentin bonding agent under it.Key words: Micro leakage, Rebounding, Surface sealant, Self-etch primer, Class V restorations.