بررسی آزمایشگاهی میزان سایش چهار نوع دندان مصنوعی

نوع مقاله : Original Articles

چکیده

مقدمه: مقاومت دندان‌های مصنوعی در برابر سایش، تاثیر زیادی در دوام و طول عمر دست دندان دارد. هدف از این پژوهش، ارزیابی و مقایسه میزان سایش چهار نوع دندان مصنوعی در شرایط آزمایشگاهی می‌باشد. مواد و روش‌ها: در این پژوهش تجربی– آزمایشگاهی، از 4 نوع دندان مصنوعی گلامور، اپل، یاقوت و ایوکلار استفاده شد. ده دندان مصنوعی پرمولر فک بالا از هر نوع دندان مصنوعی، در اکریل خود سخت شونده ثابت شدند و آزمون سایش به تعداد 1000 و 2000 چرخه انجام شد. ارتفاع دندان‌ها قبل و بعد از هر سری سایش توسط یک میکروسکوپ نوری اندازه گیری شد. داده‌ها به وسیله آزمون آماری ANOVA و آزمون تکمیلی Duncan آنالیز گردیدند (05/0=α). یافته‌ها: آزمون آنالیز واریانس تفاوت معنی‌دار میانگین سایش در 1000 و 2000 دور سایش در بین چهار گروه دندانی را نشان داد (001/0p value < ). آزمون تکمیلی Duncan در مقایسه دوبه دوی گروه‌ها، هم در 1000 دور و هم در 2000 دور، نشان داد که به جز در مورد دندان‌های اپل و یاقوت، اختلاف میانگین سایش بین همه گروه‌ها معنی‌دار بود. نتیجه‌‌گیری: در این بررسی مشخص شد که دندان ایوکلار به طور معنی‌داری کمترین سایش را نسبت به سایر دندان‌ها دارد و بعد از آن، کمترین سایش به ترتیب مربوط به دندان‌های گلامور، یاقوت و اپل بود. کلید واژه‌ها: دندان مصنوعی، آکریلی، دندان رزینی، رزین پایه، سایش، مقاومت سایشی.

عنوان مقاله [English]

In vitro wear assessment of four brands of artificial teeth

چکیده [English]

Introduction: Wear resistance of artificial teeth has an important role in denture longevity. The purpose of this in vitro study was to evaluate wear resistance of four brands of artificial teeth.Materials and methods: In this in vitro study four brands of artificial teeth, including Apple, Yaghoot, Glamour and Ivoclar were used. Ten maxillary first premolars were selected from each set and were fixed in autopolymerizing acrylic resin. Wear test was performed for 1000 and 2000 cycles. Heights of the teeth were measured under a light microscope before and after wear cycles. Data were analyzed by ANOVA and Duncan tests (α = 0.05). Results: ANOVA showed that mean wear rate of the teeth in both 1000 and 2000 cycles had significant differences (p value < 0.001). According to Duncan test, except for Apple and Yaghoot, other groups had significant differences with each other (p value2 = 0.314), (p value1 = 0.289).Conclusion: It was concluded from the results of the present study that wear rate of Ivoclar teeth was significantly lower than that in other groups. Glamour, Yaghoot and Apple teeth showed the highest rate of wear, respectively. Key words: Acrylic, Artificial teeth, Resin base, Resin tooth, Wear, Wear resistance.